Vian Enterprises, Inc.
Will design and build the proper lubrication pump to
satisfy the customer requirements. The information below is to be used
as a reference for pumping and finish size only. These gerotor types
are standards and available for production. Additional types and sizes
are designed upon request. Please contact the factory direct for more
information.
Sizing The Gerotors
Given the required discharge in gallons per minute;
and available pump drive speed in revolutions per minute, determine
the cubic inches displacement per revolution
| (GPM x 231) |
 |
| RPM |
The thickness is determined by dividing the cubic
inches displacement per revolution by the pumping area of the gerotor
or gerotors selected.
| Example: |
Design requirement of 5 GPM at 2000 RPM |
| |
| 5 x 231 |
= .577 cubic inches per
revolution. |
|
|
|
| 2000 |
|
|
| |
A 4113 gerotor, 2 3/8'" diameter x .51" thick, a 6170 gerotor, 3"
diameter x .34" thick, or a 12131 gerotor, 3 1/4" diameter x .44"
thick can be used. |
| |
Click gerotor type for more information. |
|
